GPK-32

Revision as of 19:53, 8 April 2021 by Miles (talk | contribs)
GPK-32 Inspection Robot
Access to this page is restricted to the group sysop.

GPK-32 Inspection Robot

The GPK-32 is our most popular inspection robot. It can be used to inspect any tight space that is safe for a robot to operate in, but is most commonly used by home inspectors for crawlspace inspections. As such, it has been tailored for that environment, but customers have found many other uses for the robot that we never originally imagined. It has been used to look for leaks under vehicles, to inspect train cars, and to run cables under the floors of large buildings. Below you will find an overview of the robot, as well as answers for most questions about using it, and help with troubleshooting issues you might encounter.

Basic Detail

Dimensions

(L x W x H)

12.5” x 10” x 7.25” Small enough to fit in many confined areas.
Camera RunCam 2 HD 1080P The camera is fully controllable from the robot’s controller and captures HD photos and video on a Micro SD card making it easy to transfer photos and video to your computer for use in reports.
Control 2.4GHz Wireless RC The robot and camera are easy to operate with the RC controller. The left joystick tilts the camera up and down, and the right joystick moves the robot.
Video

Transmission

5.8GHz Analog

Low Latency

A live feed from the robot’s camera will be displayed on the monitor attached to the controller. This is an analog video signal that will have no noticeable delay, and good range, but will not be a crystal-clear HD image.
Range Up to 500 Feet

Line of Sight

The maximum range is line of sight and will drop as obstacles are introduced. It is sufficient for most crawlspaces, but if the signal degrades you can simply move around closer to the robot either from above or outside the structure.
Camera

Movement

Tilt ≈ -20° to 75° The camera tilts to look down right in front of the robot and up to see almost directly above the robot. The camera itself does not pan, but the robot is skid steer so it can turn on a dime in tight spaces to see to the sides.
Lights ≈ 400 Lumens The lights work well in confined spaces and in a very large dark space it lights up to about 10 feet in front of the robot.


Buy The Robot


GPK-32 with all its components, ready for the next inspection.

The GPK-32 comes packed in a pelican case with custom cut foam to hold it and all of its components safely during shipping, and during transport between inspections. If you are interested in purchasing this complete inspection package, you can find it here on our website.







Frequently Asked Questions

Question: Can the robot take photos? Answer: Yes. The camera is set up to begin recording automatically when the robot turns on, and you can take pictures while the robot is recording without interrupting the video. You can also stop the recording and switch the camera over to photo mode to take higher resolution pictures, all from the remote control.


Question: What is the run time?

Answer: The robot comes with two DeWalt batteries. Each fully charged battery will run the robot for about two hours, and charging each DeWalt battery takes about 30 minutes.


Question: What is the range?

Answer: The maximum line of of sight range is about 500ft. This will obviously go down as obstructions are placed between the controller and the robot. The range is generally sufficient to reach the far side of a crawlspace from the outside, but if you begin to loose the connection you can move closer to the robot either from above by being inside the house, or by moving around the exterior to the other side of the house. Strong WiFi signals, or any other signal in the 5.8GHz range can cause additional inference in the video feed.


Question: Is there a warranty?

Answer: Yes.

  • SuperDroid Robots will repair any manufacturing defects for 1 year after shipment.
  • Damage from abuse or neglect will not be covered.
  • Any shipping costs are the responsibility of the purchaser.
  • Unlimited technical support.
  • Consumable items will not be covered by the warranty. Consumable items include, but are not limited to treads/tracks, bearings, wheels, and batteries.






Electrical Specs: Voltage and Current Control Inputs
Motor Controller Channels Min Voltage (VDC) Max Voltage (VDC) Continuous Current per Motor (A) Peak Current per Motor (A) Analog RC Serial
Sabertooth 2x5 2 6 18 5 10 Y Y
Y
Sabertooth 2x12 2 12 24 12 25 Y
Y
Y
Sabertooth 2x12 RC 2 12 24 12 25 Y
Y
Y
Sabertooth 2x25 2 12 24 25 50 Y
Y
Y