Difference between revisions of "Lidar"

(3D Lidar)
(2D Lidar)
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
==1D Lidar==
 
==1D Lidar==
 +
[[File:LIDAR-Lite v3.jpg|thumb|250x250px|<sdr item id=2306>Garmin LIDAR-Lite v3</sdr item>]]
  
 
===Overview===
 
===Overview===
Line 23: Line 24:
  
 
===Products===
 
===Products===
[https://www.superdroidrobots.com/shop/item.aspx/2306 LIDAR-Lite v3 Laser Rangefinder]
+
<sdr item id=2306>Garmin LIDAR-Lite v3 Laser Rangefinder</sdr item>
  
 
==2D Lidar==
 
==2D Lidar==
[[File:Hokuyo UST10LX 2D Lidar.jpg|thumb|250x250px|<sdr item id=2253>Hokuyo UST10LX 2D Lidar</sdr item>]]
+
[[File:Hokuyo UST10LX 2D Lidar.jpg|thumb|250x250px|<sdr item id=2253>Hokuyo UST10LX 10m 2D Lidar</sdr item>]]
  
 
===Overview===
 
===Overview===
'''Obstacle Detection:''' Detects obstacles surrounding the robot. The [[2D lidar]] generates a planar ring of points that extend to the closest obstacle in all directions. Able to create a rough map of the robot’s immediate surroundings.
+
'''Obstacle Detection:''' Detects obstacles surrounding the robot. The 2D lidar generates a planar ring of points that extend to the closest obstacle in all directions. Able to create a rough map of the robot’s immediate surroundings.
  
 
'''Ideal operating conditions:''' Installed at a height where obstacles are expected to be encountered. Some Lidars are sensitive to sunlight, depending on the specific model and design.
 
'''Ideal operating conditions:''' Installed at a height where obstacles are expected to be encountered. Some Lidars are sensitive to sunlight, depending on the specific model and design.
Line 56: Line 57:
  
 
===Products===
 
===Products===
[https://www.superdroidrobots.com/shop/item.aspx/ydlidar-x4-360-degree-10-meter-2d-lidar/2510/ YDLIDAR X4]<br>[https://www.superdroidrobots.com/shop/item.aspx/ydlidar-g4-360-degree-16-meter-2d-lidar/2511/ YDLIDAR G4]<br>[https://www.superdroidrobots.com/shop/item.aspx/hokuyo-urg-04lx-ug01-laser/1177/ Hokuyo URG-04LX-UG01]<br>[https://www.superdroidrobots.com/shop/item.aspx/hokuyo-ust-10lx-scanning-laser-rangefinder/2253/ Hokuyo UST-10LX]<br>[https://www.superdroidrobots.com/shop/item.aspx/hokuyo-ust-20lx-scanning-laser-rangefinder/2239/ Hokuyo UST-20LX]<br>[https://www.superdroidrobots.com/shop/item.aspx/hokuyo-utm-30lx-ew-scanning-laser-rangefinder/2252/ Hokuyo UTM-30LX]<br>
+
<sdr item id=1177>Hokuyo URG-04LX-UG01 4 meter 2D Lidar</sdr item>
  
 +
<sdr item id=2253>Hokuyo UST-10LX 10 meter 2D Lidar</sdr item>
 +
 +
<sdr item id=2239>Hokuyo UST-20LX 20 meter 2D Lidar</sdr item>
 +
 +
<sdr item id=2252>Hokuyo UST-30LX 30 meter 2D Lidar</sdr item>
 +
 +
<sdr item id=3146>RPLIDAR A1 - 360 degree 12 meter 2D LIDAR</sdr item>
 +
 +
<sdr item id=3147>RPLIDAR A2 - 360 degree 16 meter 2D LIDAR</sdr item>
 +
 +
<sdr item id=3148>RPLIDAR S1 - 360 degree 40 meter 2D LIDAR Outdoor Capable</sdr item>
 
==3D Lidar==
 
==3D Lidar==
 
[[File:Hokuyo 3D Lidar YVT-35LX.jpg|thumb|250x250px|<sdr item id=2636>Hokuyo 3D LIDAR YVT-25LX</sdr item>]]
 
[[File:Hokuyo 3D Lidar YVT-35LX.jpg|thumb|250x250px|<sdr item id=2636>Hokuyo 3D LIDAR YVT-25LX</sdr item>]]
Line 65: Line 77:
 
'''Obstacle Detection:''' Detects obstacles surrounding the robot in 3D space. The 3D lidar generates a cloud of points that extend out from the sensor in all directions horizontally and 30 degrees above and below the sensor vertically. Able to create a detailed map of the robot’s surroundings, including obstacles above the robot and below the lidar.
 
'''Obstacle Detection:''' Detects obstacles surrounding the robot in 3D space. The 3D lidar generates a cloud of points that extend out from the sensor in all directions horizontally and 30 degrees above and below the sensor vertically. Able to create a detailed map of the robot’s surroundings, including obstacles above the robot and below the lidar.
  
'''Ideal operating conditions:''' Installed on the top of the robot, low enough to the ground where the 30 degree window is able to see the area directly in front of the robot. Some Lidars are sensitive to sunlight, depending on the specific model and design.
+
'''Ideal operating conditions:''' Installed on the top of the robot, low enough to the ground where the 30 degree window is able to see the area directly in front of the robot. Some lidars are sensitive to sunlight, depending on the specific model and design.
  
 
'''Sensor Pros:'''
 
'''Sensor Pros:'''
Line 93: Line 105:
  
 
===Products===
 
===Products===
<sdr item id=2636> Hokuyo YVT-35 LX</sdr item><br><sdr item id=2828> Hokuyo YVT-35 LX (used)</sdr item>
+
<sdr item id=2636> Hokuyo YVT-35 LX 3D Lidar</sdr item><br><sdr item id=2828> Hokuyo YVT-35 LX 3D Lidar (used)</sdr item>
  
 
[[Category:Sensors]]
 
[[Category:Sensors]]
 
[[Category:Autonomous]]
 
[[Category:Autonomous]]

Latest revision as of 15:24, 27 September 2021

LIDAR (short for Light Detection And Ranging), uses near infrared light to measure distances to objects. The narrow laser-beam that’s emitted is capable of mapping physical features at high resolutions. Offering precise positioning while targeting a wide range of materials, LIDAR is a very powerful feedback system that can be used in many robotic applications.

1D Lidar

Overview

Obstacle Detection: Detects obstacles in a straight, narrow beam of light. Lidar will be more accurate (and expensive) than simple IR sensors. Lidars that detect out to 60+ feet are common.

Ideal operating conditions: Lidar can become erratic when exposed to sunlight interference. Some sensors will work perfectly outside while others may be fine with ambient sunlight and have problems only when pointed towards the sun. The rest range from slightly noisy to completely unusable outside.

Sensor Pros:

  • Data is easily processed, allowing the use of cheaper microcontrollers
  • Less expensive than 2D Lidar
  • Good detection range, update rate, and accuracy
  • Can be used for 1D positioning or following applications

Sensor Cons:

  • Only detects obstacles in a narrow beam. If these are the primary obstacle detection sensors on a robot then several of them are required and there will still be big gaps in the detection zone – between the beams and above/below them.
  • You may be tempted to sweep the sensor using an RC servo or something, but this generally doesn’t work very well. You’re better off buying a cheap 2D lidar at that point.
  • Can be vulnerable to dirt/dust and scratches.

Products

Garmin LIDAR-Lite v3 Laser Rangefinder

2D Lidar

Overview

Obstacle Detection: Detects obstacles surrounding the robot. The 2D lidar generates a planar ring of points that extend to the closest obstacle in all directions. Able to create a rough map of the robot’s immediate surroundings.

Ideal operating conditions: Installed at a height where obstacles are expected to be encountered. Some Lidars are sensitive to sunlight, depending on the specific model and design.

Sensor Pros:

  • Less data to process than a 3D Lidar
  • Much more coverage than 1D sensors like IR and 1D Lidar
  • Can be used to generate a 2D map and utilize 2D SLAM
  • Good detection range and update rate

Sensor Cons:

  • Can only see obstacles on a single horizontal plane, unable to see above and below the sensor
  • More data than 1D sensors, usually requiring a small computer to use
  • Unreliable when the robot pitches and rolls, due to the detection plane intersecting the ground

SLAM Application

Products

Hokuyo URG-04LX-UG01 4 meter 2D Lidar

Hokuyo UST-10LX 10 meter 2D Lidar

Hokuyo UST-20LX 20 meter 2D Lidar

Hokuyo UST-30LX 30 meter 2D Lidar

RPLIDAR A1 - 360 degree 12 meter 2D LIDAR

RPLIDAR A2 - 360 degree 16 meter 2D LIDAR

RPLIDAR S1 - 360 degree 40 meter 2D LIDAR Outdoor Capable

3D Lidar

Overview

Obstacle Detection: Detects obstacles surrounding the robot in 3D space. The 3D lidar generates a cloud of points that extend out from the sensor in all directions horizontally and 30 degrees above and below the sensor vertically. Able to create a detailed map of the robot’s surroundings, including obstacles above the robot and below the lidar.

Ideal operating conditions: Installed on the top of the robot, low enough to the ground where the 30 degree window is able to see the area directly in front of the robot. Some lidars are sensitive to sunlight, depending on the specific model and design.

Sensor Pros:

  • Full coverage of the robot’s environment
  • Can be used to generate a 3D map and utilize 3D SLAM
  • Reliable due to the large number of data points to base position off of
  • Works in 3D environments where the robot is pitching, rolling, and changing in elevation. Can generate 3D position and orientation estimates.
  • Can detect obstacles above and below itself, which a 2D lidar would miss.

Sensor Cons:

  • Expensive
  • Generates a large amount of data, which requires a more powerful computer to process and make use of
  • Limited viewing angle, restricts where the sensor can be placed effectively

Example Application

Footage of the SPAR autonomous security robot. 3D SLAM footage starts at 0:24.

Products

Hokuyo YVT-35 LX 3D Lidar
Hokuyo YVT-35 LX 3D Lidar (used)